APLUS features

Find out more about APLUS, doubtless the best AutoCAD add-on in the world

Get APLUSdocumentation




Thank you! Your submission has been received!

Oops! Something went wrong while submitting the form :(

AutoCAD commandline entry:   ALPL  
AutoCAD commandline entry:   ARCL  
AutoCAD commandline entry:   BDEL 
AutoCAD commandline entry:   BLEGEND 
AutoCAD commandline entry:   BLL0  
AutoCAD commandline entry:   BMW 
AutoCAD commandline entry:   BREMOVE+BADD 
AutoCAD commandline entry:   CAP  
AutoCAD commandline entry:   COL  
AutoCAD commandline entry:   CON1  
AutoCAD commandline entry:   COR  
AutoCAD commandline entry:   DFL  
AutoCAD commandline entry:   DILINE  
AutoCAD commandline entry:   DINORM 
AutoCAD commandline entry:   DIS 
AutoCAD commandline entry:   DIU_DID 
AutoCAD commandline entry:   ESC  
AutoCAD commandline entry:   ESCPL 
AutoCAD commandline entry:   ESCPL2  
AutoCAD commandline entry:   HASSOC 
AutoCAD commandline entry:   HBET_HBETA 
AutoCAD commandline entry:   HBO 
AutoCAD commandline entry:   HD 
AutoCAD commandline entry:   HLEGEND 
AutoCAD commandline entry:   HLINE 
AutoCAD commandline entry:   HM  
AutoCAD commandline entry:   HOFF_HON 
AutoCAD commandline entry:   HRO  
AutoCAD commandline entry:   HTER 
AutoCAD commandline entry:   HTERM  
AutoCAD commandline entry:   HTERM2 
AutoCAD commandline entry:   HZIG 
AutoCAD commandline entry:   LAY  
AutoCAD commandline entry:   LAYC  
AutoCAD commandline entry:   MALEN  
AutoCAD commandline entry:   NR  
AutoCAD commandline entry:   PATTERN  
AutoCAD commandline entry:   PATTERN_01 
AutoCAD commandline entry:   PLAV  
AutoCAD commandline entry:   PLD  
AutoCAD commandline entry:   PLEV  
AutoCAD commandline entry:   PLI  
AutoCAD commandline entry:   PLJ 
AutoCAD commandline entry:   PLM  
AutoCAD commandline entry:   PLP  
AutoCAD commandline entry:   PLPS  
AutoCAD commandline entry:   PLRO  
AutoCAD commandline entry:   PLRO3 
AutoCAD commandline entry:   PLS  
AutoCAD commandline entry:   PLSC  
AutoCAD commandline entry:   PLT  
AutoCAD commandline entry:   PLT2 
AutoCAD commandline entry:   PLT3 
AutoCAD commandline entry:   PLU  
AutoCAD commandline entry:   PLWELD 
AutoCAD commandline entry:   RECL 
AutoCAD commandline entry:   REVISION 
AutoCAD commandline entry:   RM  
AutoCAD commandline entry:   RME 
AutoCAD commandline entry:   RME_2 
AutoCAD commandline entry:   RML  
AutoCAD commandline entry:   RMN  
AutoCAD commandline entry:   RMNA 
AutoCAD commandline entry:   RMS  
AutoCAD commandline entry:   RMSB 
AutoCAD commandline entry:   SQ  
AutoCAD commandline entry:   VPP  
recl.gifDRAW: RECTANGLE BETWEEN SELECTED LINES
RECL command draws a rectangle (or quadrilateral) between two selected lines or polyline segments. It allows you to close custom shaped holes easily.
AutoCAD commandline entry:   RECL 
plin.gifPOLYLINES: DRAW PART OF POLYLINE CONTAINED INSIDE OTHER ONE
APLUS can draw part of polyline which lays inside another polyline.
AutoCAD commandline entry:   PLIN 
hoff.gifHATCHES: TURN OFF OR ON ALL HATCHES
With HOFF and HON commands you may easily control visibility of hatches inside your drawings. This command turns off or on all hatches regardless of their layer.
AutoCAD commandline entry:   HOFF  HON  
hu.gifHATCHES: UNION HATCHES
APLUS can union selected hatches. APLUS will set style of first selected hatch to other selected hatches.
AutoCAD commandline entry:   HU 
hbo.gifHATCHES: DRAW HATCH BOUNDARY
HBO command can draw boundary of selected hatch pattern. This may help you recover some lost information from a drawing.
AutoCAD commandline entry:   HBO 
duct.gifPLUMBING: DRAW DUCTS
After setting some parameters you may easily design ducts both inside and outside buildings.
AutoCAD commandline entry:   DUCT 
dis.gifDIMENSIONS: DIMENSION LINES SHIFT
APLUS can detect dimension lines adjacent to one that was selected and then move them to a new position.
AutoCAD commandline entry:   DIS 
detail2.gifDRAW: DRAW DETAIL RECTANGLE
DETAIL2 command works similar to DETAIL command, but it uses rectangular window shape instead of circular in DETAIL.
AutoCAD commandline entry:   DETAIL2 
plm.gifPOLYLINES: MOVE, ROTATE OR SCALE MULTIPLE POLYLINE SEGMENTS
PLM command allows you to move multiple polyline segments at once. PLRO rotates polyline segments and PLSC scales them. With these commands you may modify polylines freely.
AutoCAD commandline entry:   PLM  PLRO  PLSC  
attcase.gifATTRIBUTES: CHANGE CASE OF ATTRIBUTES
ATTCASE commmand can change case of selected attributes. This command can change case of attributes in selected instances of a block.
AutoCAD commandline entry:   ATTCASE  
bremove.gifBLOCKS: REMOVE ELEMENT FROM BLOCK DEFINITION
With BREMOVE command you may remove selected objects from block definition. Duplicate of removed objects will appear in the same place. Objects are removed from all instances of the block.
AutoCAD commandline entry:   BREMOVE  
bxa.gifBLOCKS: EXPLODE ALL BLOCKS
Command BXA will find and explode all blocks in your drawing. Additionally - block definitions will also be removed.
AutoCAD commandline entry:   BXA  
tabl.gifTOOLS: DRAW TABLE BORDERS FOR TEXT OBJECTS
APLUS is able to draw table borders for selected TEXT or MTEXT objects. TABL command detects borders between selected text objects. Overlapping texts are ignored.
AutoCAD commandline entry:   TABL  
tabe.gifTOOLS: EXPORT SELECTED TEXTS AS A CELLS TO EXCEL
TABE command allows you to export selected TEXT or MTEXT objects to Microsoft Excel. APLUS will detect position of selected texts and copy them into new excel sheet. Overlapping texts will be ignored.
AutoCAD commandline entry:   TABE  
tabi.gifTOOLS: IMPORT CONTENTS OF EXCEL FILE
APLUS allows you to import contents of Microsoft Excel file. TABI command will replace contents of selected TEXT or MTEXT objects with contents from selected Excel file.
AutoCAD commandline entry:   TABI  
tlength.gifDIMENSIONS: MEASURE TOTAL LENGTH
TLENGTH command measures and displays total length of selected objects. It can measure length of nearly all AutoCAD object types.
AutoCAD commandline entry:   TLENGTH  
projectpo.gifDRAW: DRAW POINT PROJECTION ONTO A SPECIFIED LINE
PROJECTPO command can draw projection on a specified line. It will draw a line of specified length perpendicular to the line.
AutoCAD commandline entry:   PROJECTPO  
collisions.gifTOOLS: DETECT COLLISIONS BETWEEN OBJECTS ON DIFFERENT LAYERS
COLLISIONS command can detect and show collisions between objects on selected layers. Collisions will be shown as red squares on a screen.
AutoCAD commandline entry:   COLLISIONS  
harea.gifHATCHES: MEASURE HATCH AREA
HAREA command can measure total area of selected hatches.
AutoCAD commandline entry:   HAREA  
axo.gifDRAW: DRAW 2D AXONOMETRIC PROJECTION SIMULATION
AXO command can draw simulation of axonometric projection of specified objects.
AutoCAD commandline entry:   AXO  
ropl.gifPOLYLINES: ROTATE POLYLINE SEGMENT
ROPL command can rotate selected polyline segment without affecting rotation angle of other segments.
AutoCAD commandline entry:   ROPL  
alo.gifTOOLS: ALIGN POLYLINE TO A LINE
ALO command aligns selected polyline to a line. Command aligns polyline by using specified segment. You may also flip polyline if you need.
AutoCAD commandline entry:   ALO  
unroll.gifDRAW: UNROLL SELECTED 3D OBJECT
UNROLL command can unroll selected 3D object. APLUS will draw faces of the object in a current viewport.
AutoCAD commandline entry:   UNROLL  
solidvol.gifDIMENSIONS: MEASURE SOLID VOLUME
With SOLIDVOL command you may measure volume of selected 3D solids. Result will be displayed to AutoCAD command line.
AutoCAD commandline entry:   SOLIDVOL  
alt.gifTEXTS: ALIGN TEXT TO A LINE
ALT command may be used to align selected TEXT or MTEXT object to specified line or polyline segment. After choosing aligment line (angle) you may also set new position.
AutoCAD commandline entry:   ALT  
tx.gifTEXTS: EXPLODE TEXT OR MTEXT OBJECT
TX command allows you to explode any TEXT or MTEXT object. As a result APLUS will create new polyline objects in place of exploded TEXT or MTEXT object.
AutoCAD commandline entry:   TX  
man.gifMODIFY: MOVE SELECTED OBJECTS ON A SPECIFIED ANGLE
With MAN command you can move selected objects on a specified angle. After specifying angle you will be able to move objects with APLUS snap.
AutoCAD commandline entry:   MAN  
oe.gifEDIT: OFFSET AND ERASE
With OE command you may both OFFSET selected object and erase it.
AutoCAD commandline entry:   OE  
swapsel.gifMODIFY: SWAP SELECTED OBJECTS
SWAPSEL command allows you to swap multiple objects at once. APLUS will ask you for base points of each selection and use them to swap objects.
AutoCAD commandline entry:   SWAPSEL  
isel.gifSELECT: HIDE OR ISOLATE SELECTED OBJECTS (JUST LIKE IN 3D STUDIO)
With HSEL and ISEL commands you can hide or isolate selected objects just like in Autodesk 3D Studio MAX. Use USEL command to restore hidden objects objects.
AutoCAD commandline entry:   HSEL  ISEL  USEL  
diline.gifDIMENSIONS: QUICK DIMENSION LINE
With DILINE you can create dimension lines in seconds. Just draw a line and APLUS will automatically draw dimension lines.
AutoCAD commandline entry:   DILINE  DIU  DID  
diflat.gifDIMENSIONS: FLATTEN DIMENSIONS
You can flatten selected dimension lines with DIFLAT command. Use it to get rid of problems while rotating drawings with dimension lines.
AutoCAD commandline entry:   DIFLAT  
replacet.gifTEXTS: REPLACE TEXTS (BATCH)
With APLUS you can replace multiple texts. Just specify phrase to be replaced and specify new content. APLUS will search for specified phrase in specified area and replace all instances.
AutoCAD commandline entry:   REPLACET  
bar.gifCONSTRUCTIONS: DRAW BARS
APLUS can draw bars with specified wrapper and width.
AutoCAD commandline entry:   BAR  BARDI  
detail.gifARCHITECTURE: DRAWING DETAIL BULB
Create detail bulb of specified area.
AutoCAD commandline entry:   DETAIL  
biindex.gifBLOCKS: INTEGRATED BLOCK MANAGER
Thanks to integrated block manager you can quickly add blocks into your drawing. After installing APLUS BIINDEX menu will apear in AutoCAD toolbar.
AutoCAD commandline entry:   BIINDEX  
plshadow.gifPOLYLINES: SHADOW
APLUS will draw simulated shadow of specified object on specified direction with specified lenght.
AutoCAD commandline entry:   PLSHADOW  
plpers.gif
APLUS can simulate one-point perspective of selected object from specified vanishing point.
AutoCAD commandline entry:   PLPERS  
rm.gifAREAS: AUTOMATIC AREA CALCULATION
APLUS will automaticly detect room border and count its area for you.
AutoCAD commandline entry:   RM  
bi.gifBLOCKS: IMPORTING BLOCKS WITH SPECIFIED DIRECTION
There are numerous blocks that you have to import into drawing with specified order, such as north indicators or furniture, with APLUS you will be asked for insertion angle just after placing them.
AutoCAD commandline entry:   BI  
bil.gifBLOCKS: IMPORT LAST
Import last imported block again.
AutoCAD commandline entry:   BIL  
ax1.gifARCHITECTURE: AXIS BULBS
Descript axises with numerical bulbs simply by clicking on them.
AutoCAD commandline entry:   AX1  AXA  
nr.gifARCHITECTURE: PLACE ASCENDING NUMBERS
Place ascending numbers on your drawing to descipt elements. You can specify prefix or suffix. When needed you can quickly update numbers.
AutoCAD commandline entry:   NR  NRU  NRP  
bcount.gifBLOCKS: BLOCK COUNTER
Select block and specify where do you want to place counted value. APLUS will link it with real number of blocks, so whenever number of blocks will change, you can update it.
AutoCAD commandline entry:   BCOUNT  BCU  
dlic.gifDRAW: CONTINUOUS DIMENSION LINE
APLUS can increase speed of dimnsioning.
AutoCAD commandline entry:   DLIC  
papers.gifPAPERS: QUICK DRAWING OF THE MOST COMMON PAPER SIZES
Draw rectangle of selected paper size (A, B or C series) in model space. APLUS will ask for orientation (horizontal or vertical) and scale (1 : X).
AutoCAD commandline entry:   A0  A1  A2  A3  A4  A5  A6  
z1.gifZOOM: PREDEFINED ZOOM SCALES
Use APLUS to zoom viewports in layouts to specified scales (such as 1:50, 1:100 etc.).
AutoCAD commandline entry:   Z1  Z2  Z5  Z10  Z20  Z25  Z50  Z100  Z200  Z250  Z500  Z1000  Z2000  Z2500  Z5000  
bindex.gifBLOCKS: INDEXING BLOCKS
With APLUS you can quickly index all your blocks. Click on the screen after typing BINDEX command to display listing of your blocks.
AutoCAD commandline entry:   BINDEX  
blist.gifBLOCKS: LIST BLOCKS
Create list of blocks used in your drawing.
AutoCAD commandline entry:   BLIST  
attma.gifBLOCKS: MATCH ATTRIBUTES
APLUS can match attributes of selected blocks. Pick source attribute and then select blocks you wish to change.
AutoCAD commandline entry:   ATTMA  
zi.gifZOOM: ZOOM INFO
Show information about zoom level in all layouts in all viewports.
AutoCAD commandline entry:   ZI