www.cadaplus.com Commands beginning with E , ARCHITECTURAL

	ESCPL1 - command description
	straight staircase (plan)

		commandline entry:   ESCPL1
		menu:   APLUS > ARCHITECTURAL > ESCPL1

	To draw straight stair: 1. Specify story height 2. Specify insert point 3. Specify staircase width 4. Specify staircase length 5. Select proper stair from dialogue box Command depends on setting right units in APLUS. To do so, use command: AUM - millimetres AUCM - millimetres AUMM - millimetres